Rode Wireless Go II Single

Highlights
1-Person Interviews, Vlogs & Podcasts
Built-In Omni Mic & 3.5mm Mic Input
Mini Clip-On Transmitter/Recorder
Records 7 Hours of Uncompressed Audio
Easy Setup with No Menus
Stereo or Dual-Mono Output Modes
7-Hr Rechargeable Batteries + USB Power
Powerful Features/Customization via App
USB Audio Interface Functionality
Up to 8 Mics on Set / 656' Range
Brand: Rode
Warranty: Check Warranty Only
Availability: In Stock
Rs. 49,000 Rs. 56,000
You save Rs. 7,000 (12% Off)

Features

Expanding on the original Wireless GO with updates allowing for two-person shoots, onboard recording, a greatly extended range, and flexible output options, the black Rode Wireless Go II Single system lets videographers, vloggers, and mobile journalists confidently and quickly incorporate wireless audio into their setup regardless of their experience level or what device they're recording to. Ideal for creators who only need to record one subject now, but want the option for two subjects later, the Wireless GO II Single comes with a single transmitter and a dual-channel receiver.


Boasting secure Series IV 2.4 GHz digital transmission, easy operability, and a built-in mic (lavalier mic available separately), the system is ready to go at the press of a button; you can focus on getting the shot knowing that the Wireless GO II is delivering quality audio at a range of up to 656 feet. There are no menus and no finicky dials, just simple power-on-and-go functionality and a bright, informative LCD screen showing you what you need to see. When you're ready for more, use Rode's companion app to access a powerful feature set and extended customization of settings.

The transmitter can capture uncompressed audio with a maximum resolution of 24-bit / 48 kHz. Using Rode's companion app, you can export files in the same recording resolution, or other settings, such as 32-bit float / 48 kHz, which only offers compatibility with DAWs and other programs that support 32-bit float. The transmitter does not record in 32-bit float.

Version II Upgrades

Whereas the original Wireless GO employed a single channel, version II is a dual-channel system, capable of handling two transmitters at the same time for simple, two-person shoots with low latency (3.5 to 4 ms).

Use the Rode Central companion app (Mac, Windows, iOS, and Android compatible) to unlock powerful features and device customization—onboard transmitter recording, configurable safety track recording in dual mono mode, file playback and export, and more.

Via the app, the transmitter provides an onboard audio recorder offering up to seven hours of uncompressed recording (24-bit / 48 kHz WAV) or 24 hours of compressed recording, perfect for worry-free backup recording or a fast and easy way to capture sound from your subject. Export files in various formats such as MP3 or WAV (16-, 24-, or 32-bit float) with date and time stamp information as well as automatic markers anywhere the transmitter-receiver link was broken.

Since the Wireless GO II can handle two transmitters at once (single transmitter included), it features the ability to switch between stereo or dual-mono output modes. This enables each transmitter, and therefore each subject, to be recorded to a separate channel. Alternatively, signal from two transmitters can be mixed together and recorded identically to left and right channels. Use the app to activate safety track recording (-20 dB on the right channel).

In addition to the traditional 3.5mm TRS analog output, the Wireless GO II receiver has a USB Type-C digital audio output for operation as a 24-bit / 48 kHz audio interface. This can be connected to a computer with the supplied USB Type-C to USB Type-A cable, to the Lightning port of an iOS mobile device via the Rode SC15 cable, or to the USB Type-C port of a laptop, iPad Pro, or Android mobile device with the Rode SC16 cable (SC15 and SC16 cables available separately).

The new Series IV technology extends the line-of-sight operating range of the Wireless GO II to approximately 656' compared to the 230' maximum range of the original Wireless GO. It also offers increased signal strength in crowded wireless environments. Plus, the system is designed to run both transmitters without affecting the range performance.

Powerful Customization

"Always" Recording Mode: When this mode is activated, the transmitter will start recording audio as soon as it is switched on. It will continue recording until it is switched off, regardless of the status of the receiver. This means that you will have a continuous recording from the moment the transmitter is switched on, making this mode suitable for using the Wireless GO II as a standalone field recorder. Note that in this mode, the "mute" function will not affect the onboard recording (although it will still mute the wireless transmission). This will be the default recording mode when the Wireless GO II is on the latest firmware.

"Backup" Recording Mode: When this mode is activated, the transmitter will start recording audio when it connects to the receiver. When the receiver is switched off, the recording will stop. This means that if the signal drops out at any time or if you forget to hit record on your device, you will still have a backup recording for the period that the wireless connection was active.

Off: Switching off the recording function means the transmitter will not record any audio. Existing recordings will remain on the unit until manually deleted using Rode Central.

Activatable input pads on the transmitters engage low-sensitivity mode to avoid distortion when dealing with loud talkers.

LED brightness adjustment for the transmitters allows optimal visibility in any shooting environment.

Change the functionality of the transmitter power button to either mute the input, drop a marker into the onboard recording, or deactivate the button.

No Specifications Found